Nail Drill Bits. Tools

Staleks Smart 11/7mm, length 102mm, blade length 7mm. With a two-way slice of cut edges on the diamond sliph circumferential circle, flat lips do not pull or clutch cut skin. Downward slops provide a good overview during work. The cut without an act, the pen shape is straight.
Bunctures are made of stainless steel used for the production of surgical instruments and are thermally processed in vacuum kilns to ensure durability. Safe autoclave sterilization.
HC-11-7 pitchers:
length of the cut machine 102 mm (+/- 1 mm
blade length 7 mm (+/- 0.5 mm)
thanks to a two-way slice of cut edges on the diamond sliph circumferential circle, the flat lips do not pull or clutch the cut skin,
the downward blade guarantees a great review during work,
from stainless steel used to produce surgical instruments,
you can sterilize in the autoclave.

Glow F2 nail lamp. The evenly spaced LEDs and the innovative Dual LED technology used guarantee perfect nail styling.
Bestene device with Dual LED technology
It is equipped with 57 correctly positioned LEDs (no so-called dead zone) with a total power of 220 W, ensuring perfect curing of gels and hybrid lacquers. The Dual Led technology used in this device makes the diodes emit light of two wavelengths, without tiring the eyes and providing a wide spectrum of action. Thanks to the solutions used, the lamp cures even the most demanding products quickly and efficiently, reaching even the most difficult to reach places on the nail plate.
The lamp is equipped with a timer with four programmed working times: 10 s, 30 s, 60 s and 99 s (so-called "low heat mode"), which are counted down on the digital display. In addition, if no mode is selected, the built-in motion sensor will automatically turn the lamp on after placing a finger or foot under it, assuming a maximum exposure time of 120 s . The display will then show the curing time. This allows you to conveniently select the length of exposure for the styling job you are currently doing and the products you are using.
Optimal "Low Temperature Mode"
No more unpleasant burning during styling! The already mentioned "Low Heat Mode" system means that while the products are curing on the nails, the device gradually increases its power, thus heating up more slowly. This prevents a hot sensation during the curing process. This is an indispensable feature, especially when curing gels, which often causes discomfort when using other commercially available lamps.
The bottom panel can be detached
The device has an easily disassembled removable bottom which, in the case of pedicure or foot care procedures, makes it much easier to place the foot under the lamp. This option is also ideal for cleaning or disinfecting the equipment. The silver colored handle with a polished finish is a visually appealing addition that makes the unit easier to move and is suitable for mobile stylists. There is also a recess on the body that can be used as a phone stand . This allows you to make treatment time more enjoyable with your favorite movie.
Unique functional device
Useful functions, an ergonomic shape and a unique design with a mirrored, metallic finish in silver shades make the lamp a practical and at the same time extremely stylish element of the living room interior . The appropriate dimensions allow the entire arm or leg to be comfortably positioned under the lamp , ensuring even curing of styling.
Included: lamp, power supply, instruction manual in Polish.
Data:
Body color: shades of silver
Timer: 10 s, 30 s, 60 s, 99 s
Maximum operating time: 120 s
Motion sensor: yes
Display: Digital LCD
Number of LEDs: 57
Power: 220 W
Input voltage: 100-240 V
Light wavelength: 365 nm, 405 nm
Dimensions: 22.5 cm x 20 cm x 11 cm
Warranty: 12 months

DUAL LED GLOW 5 48W lamp

The latest generation professional UV/LED lamp that quickly and rapidly confirms all gel, hybrid lacquers and other light-curing preparations thanks to the use of dual LED technology. It emits a white light that does not strain the eyes. The SUN 5 lamp has an energy-saving light source with maximum output and double the wavelength range of 365 nm and 405 nm. In addition, 24 diodes give a total output of 48 watts. The light has a built-in motion sensor, 60, 90 and 19 second timer, and once the sensor is triggered, it burns continuously for 120 seconds. 99 seconds "Low Voltage Mode" is a mode in which the lamp power is gradually increased for 30 seconds. Eliminates burning when transferring construction gels. Large electronic display makes it easy to keep track of time.
Operating time: 60s, 99s, 120s

Light range: 365nm, 405nm
Service life: 50,000 hours

The Ocho Nails 8 nail lamp is a device that makes it easy to perform manicure and pedicure procedures with hybrid nail polishes, gels or other light-curing preparations thanks to its practical features. The evenly spaced LEDs and the Dual LED technology used guarantee a perfect fixation of the nail . The minimalistic design, ease of use and useful features make the lamp ideal for both professional and home use.

The perfect tool for removing dust from cutters
The D-13-1 is an extremely useful tool for keeping the cutters used for manicures or pedicures clean and hygienic. A small, practical tool that effectively removes nail product and cuticle residue from the cutter blades, extending their life and ensuring optimal performance. It penetrates precisely into every crevice and perfectly removes dust and dirt. Properly selected plastic bristles allow the cutters to be thoroughly cleaned without damaging their surface. The pin size is universal, so the brush fits most milling machines on the market.

The tapered ceramic cutter is an extremely versatile tool. The ceramic cutter provides precise and safe use. Its tapered shape makes it easier to access hard-to-reach areas, resulting in better nail preparation results for further treatments.
The cutter is made of high-quality material, which makes it durable and long-lasting. It can also be safely sterilized and disinfected , ensuring high standards of hygiene.
Data:
Material: zirconium oxide
Size: Ø 1.9 mm
Shape: cone

MARATHON K35 + SH30N milling machine in white.A professional milling machine designed primarily for work in beauty salons, but also for home use. Small dimensions and intuitive operation make working on it a real pleasure. Available in white.
The set includes:- milling machine head - milling machinebase- foot pedal- head support- manual- warranty

Efficient poiatric tarry with absorber
High-end orthopaedic tarry with absorber Saeyang Marathon Cyclone-Vac is a specialized device to maintain high standards of hygiene in the office, effectively protecting the health of service providers and clients. A professional cutting machine is designed for pedicure, especially dry handling procedures in the podiatry, but also works well during manicure. An effective head with absorber and an intuitively understandable office greatly facilitates the work of an orthopaedic doctor by facilitating a wide range of procedures.

The Allelux X3 lamp is suitable for both manicures and pedicures.
The lamp has great power, a unique design and a convenient hand/foot opening. The ergonomic shape, simplicity and intuitiveness of use are just some of the many benefits this model has.
Thanks to dual LED technology, the lamp distributes the light evenly and, most importantly, reliably, so your styling will be perfectly anchored wherever you go.
The size of the lamp allows you to freely insert your hand without having to separately harden your thumbs and feet!
Technical Data:
Maximum power: 54 watts
Number of UV LEDs: 18 pcs.

A double-sided, very well-contoured manicure tool made of stainless steel.
The tool perfectly removes nail plate cuticles and membranes.
The angle file is used for specialized podiatric work. Especially when the work involves ingrown nails. You can use it to file the sides or hard-to-reach edges of the nails.
The tool can be sterilized in a ball sterilizer.

- High wear resistance- Perfect heat reduction- Very high removal- Completley resistant to chemical disinfectants- an absolute "EYE-CATCHER" in your studioSolid carbide cutters with cutting cone tip with cross toothing The bit is characterized by very high strength and durability. Working on artificial nails is guaranteed by the rounded cutting tip. The cutter is designed for professional use for the removal of gel and acrylic panels with high efficiency and celebrations. It will also act like the removal of calluses. Wet and dry use.

Diamond cutter in "HIGH QUALITY" The precision stainless steel shank is hardened and the diamond coating. These allow a very high capacity and durability. It is perfectly suitable for professional use for the removal of calluses, corns, and for finishing nails with a high efficiency. The diamond cutter is for wet adn try use.